核桃去殼機 is a widely used walnut processing equipment. Because walnut has a very hard shell, so the processing industry of walnut food has formed a certain obstacle. And the application of the shelling machine for many manufacturers to bring great convenience.
核桃剝殼機的工作原理
This machine is mainly used for peeling walnuts. According to the type and size of walnuts, can flexibly adjust the crushing device that is the gap between the stator and rotor. And then achieve the effect of shelling.
核桃剝殼機由上料斗進料。經過兩個錐形桶相互旋轉剝殼後，仁與殼完全分離，便於人工分揀，並且工作效率也能大大提高。
操作核桃剝殼機時需注意的事項
在開始使用剝殼機之前，有必要檢查連接和傳動部分是否鬆動，以及是否有異常現象。同時也要檢查電源和各線路的連接是否正常。
Before the shelling machine shipped out of the factory. The gap between the rollers has been adjusted in advance, can be used for general walnut. But after the customer received the machine, or should process according to the walnut to further adjust.
由於不同品種核桃的殼厚和大小不同，客戶可以先用少量核桃試用，以達到最佳剝殼效果。
核桃剝殼機的操作步驟
事實上，核桃剝殼機屬於全自動機器，操作員只需將核桃連續放入，適量放入送料口即可。
根據上述工作原理進行處理後，經過剝殼的核桃將從出口排出，並且只需準備收集即可。
同時，操作員應嚴格遵守機器的操作注意事項，以確保機器在運行過程中的安全。
機器參數
| 功率 | 1.5kw |
| 電壓 | 380V |
| 頻率 | 50赫茲 |
| 輸出 | 300-500公斤/小時 |
