A peanut cutter is a machine for cutting whole nuts. The machine can cut peanuts, almonds, walnuts, macadamia nuts, cashews, and other nuts. In the process of cutting peanuts, the peanuts can be either raw or cooked roasted peanuts. Processed peanuts can be used in the production of cakes and biscuits. It is suitable for peanut farms, nut processors, bread producers, biscuit processors, and nut snack producers.
The effect of peanut cutting machine
The peanut pelletizer can cut peanuts into pieces. The conventional size is 1-3mm, 2-4mm,3-5mm 4-8mm. The machine can be adjusted. The size of peanuts can be adjusted by adjusting the handle of the peanut pelletizer. The size of the diced pieces can be processed according to the products produced. For example, after a batch of bread is produced, it is necessary to sprinkle some peanuts on the raw noodles to increase the flavor, and it can be processed according to the size of the bread and the desired effect. Adjusted the peanut cutter
Products processed by peanut chopping machine
The peanut butter can cut peanuts, walnuts, cashews, hazelnuts, and other nuts. Some common nuts can be processed by the peanut cutter. However, many of the customers we meet are used to cut peanuts for different reasons. It is not because the machine can only process peanuts, or the effect of processing peanuts is relatively good, but because peanuts themselves are more common, and the price of peanuts is cheaper than other nuts, and the taste of peanuts is more mellow, except for people who are allergic to peanuts. Most of them like to eat peanuts very much.
Processing of peanut material
If you want peanuts to be peeled off during production, you can choose to use a peanut peeling machine for peeling, so as to avoid the bitter taste of red peanut peels. If you want cooked peanuts, you can choose to use a roasting machine to roast the peanuts first, then cut the peanuts, and the roasted peanuts will have a stronger aroma.
The screen of the nut shredder machine
After the machine passes through the cutting, because the peanuts are cut in irregular shapes, the size of the peanut cutter after cutting is somewhat different. It needs to be classified again with a screen. The machine will have two layers of screens to pass the peanuts. After the peanuts are cut, the peanuts that have been cut are divided into three levels through a screen.
Material of the peanut cutting machine
The blade of the machine is made of No. 45 steel. It is worth noting that because the peanuts have their own grease, the machine may rust if it is not used for a long time, but the machine will not be used through continuous use. Therefore, nut oil is very important for the machine. Instead, it has a protective effect. In addition, the parts in contact with the material are made of stainless steel, such as the inlet, outlet, and screen, which can ensure safety, hygiene, and durability.
Products processed by peanut chopping machine parameters
| del | Capacity | Voltage | Power | Dimension | Weight |
| TZQL-400 | 400kg/h | 380V | 4.9KW | 1.6*0.8*1.5M | 300KG |
The machine composition of the peanut cutting machine
The peanut pelletizer is composed of several parts, such as the feed port, the feed port, the vibrating screen, the motor, and the feed control handle. The peanut pelletizer is exquisite in design, the machine occupies a small area, but is powerful. So very popular.
The ingenious design of the peanut cutter
The peanut pelletizer has a special design at the feed opening. When a large number of peanuts are poured into the feed opening, the machine may not work smoothly or jam at the beginning. If a small amount is poured each time, it will cause waste. Manpower needs to stay by the side of the machine all the time, so the machine is designed with a feed controller. When the machine starts working, the feed of the machine needs to be set to a smaller value. When the machine enters the working state, the feed inlet can be adjusted to be larger.
Peanut cutting machine video
